TMS ASSEMBLY and ALIGNMENT DOCUMENTATION
- Document #:
- LIGO-T1100304-x0
- Document type:
- T - Technical notes
- Abstract:
- TMS ASSEMBLY and ALIGNMENT DOCUMENTATION
REFER TO LIGO-D1101064 FOR TOOLING
TMS telescope alignment is covered in T1100603, IAS procedure to roughly align TMS to ETMX in T1300749 and "Fine" initial alignment after things are in chamber is in E1200453.
- Files in Document:
- None
- Topics:
- Authors:
- Notes and Changes:
- ACTIONS
1) KEN - remove links that are tooling!! - DONE CALUM
2) CALUM - add links from Keita - DONE
3) KEN - add links to key assembly docs and the like - In Progress
- Related Documents:
- LIGO-E1100841: TMS Transportation-Installation Restraint Procedure
- LIGO-E1000097: ETM TransMon Telescope SUS Installation Plan
- LIGO-E1100651: TMS Top Mass Assembly Procedure
- LIGO-D1100908: aLIGO TMS TELE-OPT TABLE TOOL ASSY-GENIE FORK CONNECTION
- LIGO-D1100807: aLIGO TMS Setup Table Bosch-Frame Assem.
- LIGO-D1101096: aLIGO TMS OPT TABLE-TELE- SUPPORT BRIDGE CONNECTION
- LIGO-D1101095: aLIGO TMS TELESCOPE-SUPPORT BRIDGE CONNECTION
- LIGO-D1101097: aLIGO TMS TELE-OPT TABLE-BALANCE BRIDGE interface
- LIGO-E1200453: Fine Initial Alignment Procedure of the Transmission Monitor Telescope
- LIGO-T1100600: Requirement For Adjustment Procedure Of Advanced LIGO Transmission Monitor Telescope
- LIGO-T1100603: TMS Telescope Alignment Procedure
- LIGO-G1101254: H1 TransMonEy Telescope focal tuning results
- LIGO-D1101096: aLIGO TMS OPT TABLE-TELE- SUPPORT BRIDGE CONNECTION
- LIGO-D1002097: aLIGO_TMS_TEST_MASS_ASEM
- LIGO-D1200565: aLIGO TMS tele tool input end mirror assembly
- LIGO-E1201012: TransMonSUS Assembly & Installation Procedure
- Referenced by:
- LIGO-D1100106-v3: TMS Telescope Bench Support
- LIGO-D0901880-v5: aLIGO AOS SUS Transmission Monitor System (TMS, TMTS) Assembly