Background and introduction to 3D Printing BSC and HAM Chambers

Document #:

LIGO-T1600334-v4

Document type:

T - Technical notes

Abstract:

3D Printing Files and Instructions to construct a 1:24 scale model of the BSC and HAM LIGO Chambers.

Useful document on background and introduction to 3D printing LIGO but for latest STL files refer to final report at https://dcc.ligo.org/LIGO-T1800358/public

Files in Document:

• LIGO-T1600334-v4.pdf (file is not accessible)

Other Files:

• BSC Cover.STL (file is not accessible)
• BSC End Cover.STL (file is not accessible)
• BSC ISI bottom plate.STL (file is not accessible)
• BSC ISI middle plate.STL (file is not accessible)
• BSC ISI top plate.STL (file is not accessible)
• BSC ISI triplate.STL (file is not accessible)
• BSC Lower Shell Bottom.STL (file is not accessible)
• BSC Lower Shell Middle.STL (file is not accessible)
• BSC Lower Shell Top.STL (file is not accessible)
• HAM 60in Cover.STL (file is not accessible)
• HAM 84in Cover.STL (file is not accessible)
• HAM Chamber.STL (file is not accessible)
• HAM ISI bottom.STL (file is not accessible)
• HAM ISI top.STL (file is not accessible)
• HAM Legs.STL (file is not accessible)
• HAM Septum Door.STL (file is not accessible)
• LIGO-T1600334-v4.docx (file is not accessible)

Topics:

• Modelling

Authors:

• Ellie Parisi

Referenced by:

• LIGO-T1500335-v3: Summary of findings on 3D printing/printers and a plan for the 3D printing of the LIGO observatory
• LIGO-T1800358-v3: Final Report - Printing and Assembling LIGO Mini Model (scale 1:24)