OMC Lower Wire Clamp Development, Crimp and Testing Procedures
- Document #:
- LIGO-T1300081-v2
- Document type:
- T - Technical notes
Other Versions:
- Abstract:
- New wire clamps were needed for the lowermost wire clamps on the aLIGO OMC suspension. Being a new design, the clamps were tested for ultimate strength and repeatability.
- Files in Document:
-
- T1300081-v2 OMC Lower Wire Clamp Development, Crimp an...pdf (file is not accessible)
- Other Files:
- T1300081-v2 OMC Lower Wire Clamp Development, Crimp a...docx (file is not accessible)
- Topics:
- Authors:
- Notes and Changes:
- Added detail picture of clamp.
Added picture of measuring thickness of clamp.
Revised Section 3.5 to better define the allowable thickness range.
Revised Table 1 to add the measured thicknesses of the clamps used in testing.
- Related Documents:
- LIGO-D1200971: Lower Wire Clamp (OMCS)
- LIGO-D1102209: aLIGO Output Mode Cleaner Mount Bracket
- LIGO-D1300083: Lower Wire Crimpers (OMCS)
- LIGO-D1300081: Modified Amphenol 2051 Jaw (OMCS)
- LIGO-T080117: Output Mode Cleaner Suspension (OMCS) Assembly Procedure
- Referenced by:
- LIGO-D1300081-v1: Modified Amphenol 2051 Jaw (OMCS)
- LIGO-E1300897: aLIGO, SUS, OMCS