CO2 laser pulling machine for fabrication of fused silica suspension fibres
- Document #:
- LIGO-T1000239-v1
- Document type:
- T - Technical notes
Other Versions:
- Abstract:
- The CO2 laser machine set up is used for the fabrication of silica fibres and was designed and prototyped within the IGR, University of Glasgow. This document provides an overview of the design and description of the set up and its operation. A description of the alignment procedure of the system, software involved for machine control/signal processing and fibre pulling technique has also been discussed.
- Files in Document:
-
- DCC_T100239.pdf (file is not accessible)
- Topics:
- Authors:
- Referenced by:
- LIGO-D070560-v2: ALIGO SUS CO2 Laser Machine_Overall Assembly_[CO2_GLA_ASM_OVERALL]
- LIGO-T1000337-v4: Quadruple Suspension Monolithic Stage Final Design