Application of hysteresis model to quad SUS
- Document #:
- LIGO-T080056-v1
- Document type:
- T - Technical notes
Other Versions:
| LIGO-T080056-x0
12 Feb 2009, 00:05 |
- Abstract:
- Explored the idea that the anomalous tilt seen in the suspensions is a function of hysteresis in the wire at the point where it bends near the wire clamp. The results from experiments suggested a quantitative model of the effect.
- Files in Document:
-
- T080056-00-K.pdf (file is not accessible)
- Other Files:
- T080056-00-K.doc (file is not accessible)
- Topics:
- Authors:
- Notes and Changes:
- This is one document of several exploring hysteresis and alignment issues in the quad pendulum. See related documents for the other documents in this study. T080059 is part 2 of this particular study.
- Related Documents:
- LIGO-T080028-v1: Lateral blade movement in clamps Experiment
- LIGO-T080030-v1: TILT TESTS ON RAL NOISE PROTOTYPE
- LIGO-T080033-v1: Tests with single two-wire pendulum
- LIGO-T080044-v1: Tests with single two-wire pendulum – part two
- LIGO-T080056-v1: Application of hysteresis model to quad SUS
- LIGO-T080059-v1: Tilt tests on the RAL noise prototype – part 2
- Referenced by:
- LIGO-T080028-v1: Lateral blade movement in clamps Experiment
- LIGO-T080030-v1: TILT TESTS ON RAL NOISE PROTOTYPE
- LIGO-T080033-v1: Tests with single two-wire pendulum
- LIGO-T080044-v1: Tests with single two-wire pendulum – part two
- LIGO-T080059-v1: Tilt tests on the RAL noise prototype – part 2
- LIGO-T080056-v1: Application of hysteresis model to quad SUS