LIGO Document G1300437-v1

aLIGO Installed A-1 Adapter Measurements, Oplev/Pcal Receiver Side (LHO, LLO)

Document #:
LIGO-G1300437-v1
Document type:
G - Presentations (eg Graphics)
Other Versions:
Abstract:
This sketch was generated to facilitate a valid decision on Oplev/Pcal Receiver Pylon placement.

NECESSARY BECAUSE:
CAD models and available vendor (PSI) drawings have been found not to agree with installed V.E., namely, A-1 Adapters at all End Stations. This sketch tabulates measured locations of features of interest (compression fittings, bellows) on each installed A-1 Adapter. These features must be avoided for good placement of Oplev/Pcal Receiver Pylons.

Authors:

DCC Version 3.4.3, contact Document Database Administrators