DCN-TMS Tablecloth 1st Article Reworks

Document #:

LIGO-E1100277-v1

Document type:

E - Engineering documents

Abstract:

TMS will use the outermost two blade cartridge slots in the upper suspension weldment. The 1st Article Tablecloth structure must be reworked to accommodate the resulting shift of the suspended mass WRT the weldment.

Files in Document:

None

Topics:

• Change Control
• Auxiliary Optics

Authors:

• Craig Conley

Keywords:

DCN TMS Tablecloth 1st Article Reworks

Notes and Changes:

DESCRIPTION OF CHANGES:

D1001129-v4:
1) Added one 1/2-20 THRU tapped hole (for balancing of the TMS ISC assembly D1000484). See sheet 2.

D1100554-v1:
Initial release. Is designed to accommodate mounting of Tablecloth Structure parts which are moved away from their mounting points due to shifting of the suspended mass WRT the TMS suspension weldment (see abstract).

All other drawings revised herein are reworks, primarily due to shifting of the suspended mass WRT the TMS suspension weldment. See the drawings, all changes in red.

COMPLETE DRAWING CHECK BY:
Ken Mailand

FINAL APPROVAL:
Ken Mailand
Calum Torrie

Related Documents:

• LIGO-D060311-v3: ADVANCED LIGO, SUS, QUAD N-PTYPE TABLECLOTH, FRONT AND REAR PLATE, NOISE TABLECLOTH
• LIGO-D1000407-v2: aLIGO_OSEMS_INTERMIDIATE_SUPPORT_RIGHT_SIDE_BRACKET
• LIGO-D1000408-v2: aLIGO_BOSEMS_INTERMIDIATE_SUPPORT_LEFT_SIDE_BRACKET
• LIGO-D1000411-v2: TMS Intermediate OSUM Support Plate, Rear
• LIGO-D1001129-v4: aLIGO ETM OPTICAL TABLE
• LIGO-D1100554-v1: TMS Osem Plate Clamp