aLIGO TCS Ring Heater Parent UHV Cable Assembly Formal Drawing Tree & BOM

Document #:

LIGO-E1000699-v6

Document type:

E - Engineering documents

Abstract:

This document pertains to the parent cable assembly, D1001517, serving BOTH the upper and lower ring heater segment assemblies.

The top-level interface is to be integrated, in-vacuum, to the SEI cable that is routed through the upper quad structure.

The low-level interface is to be integrated by the TCS team with each of the ring heater assemblies (D1001838-v2 and D1001895-v2).

Files in Document:

• E1000699-v6_aLIGO TCS RH Parent UHV Cable Assy, FORMAL...pdf (file is not accessible)

Other Files:

• E1000699-v6_aLIGO TCS RH Parent UHV Cable Assy, FORMA...xlsm (file is not accessible)

Topics:

• Fabrication
• Vacuum
• Auxiliary Optics
• Final Design

Authors:

• Mindy Jacobson
• Stephen O'Connor
• Ayodele Cole

Notes and Changes:

-v6 incorporates DCN E1200893 with accurate updates to the as-built SUS (RAL) boxframe, posted 10-Oct-2012 by Bobby Moore. These nutplates and washer plates are for use in aLIGO TCS with cable sub-assembly D1001521 and mating with part D1001756.

Related Documents:

• LIGO-D1001517: TCS Ring Heater In-Vac Cable Assembly

Referenced by:

• LIGO-E1000700-v4: DCN, aLIGO TCS Ring Heater Parent UHV Cable Assembly
• LIGO-E1200600: aLIGO, AOS, TCS, Ring Heater [RH] Assemblies
• LIGO-E1200893: DCN, Revised Nut- and Washer- Plates Serving the aLIGO TCS Ring Heater UHV Cable Installation
• LIGO-D1001517-v6: TCS Ring Heater In-Vac Cable Assembly