LIGO Document E1000693-x0

DCN - Production HLTS Fixtures

Document #:
LIGO-E1000693-x0
Document type:
E - Engineering documents
Abstract:
This is a DCN for drawings of production versions of HLTS fixtures.
Files in Document:
None
Authors:
Keywords:
DCN HLTS SUS
Notes and Changes:
Upper Blade Bake Fixture:
D080265-v3: Completely revised from original version so that the Upper Blades can be baked after being assembled into the Rotational Adjuster.
D080268-v2: Completely revised from original version so that the Upper Blades can be baked after being assembled into the Rotational Adjuster.
D1003305-v1: Initial release.
D1003307-v1: Initial release.
D1003306-v1: Initial release.
D080267-v2: Completely revised from original version so that the Upper Blades can be baked after being assembled into the Rotational Adjuster.

Upper Blade Library of Clamps:
D0900665-v3: Modified length of SHCS because of modification to Inside Blade Clamps.

Blade Pulldown Device:
D020660-v1: Redesigned from the original to use HLTS Upper Wire and to use wire clamps for the Upper and Lower Blades of the HLTS, HSTS and OMC SUS.
D010266-v1: Cylinder is thinner and holes for wire clamps have been relocated.
D010261-v1: Adjusted dimensions to fit with revised mating parts. Changed material to 304, 316 or 302 SSTL from 300 SSTL.
D010268-v1: Redesigned to include a wire groove sized for HLTS Upper Wire (0.024" diameter).
D1003362-v1: Initial release of Blade Pulldown Device Base Plate.
D0901814-v1: Initial release of HLTS Inside Upper Wire Upper Clamp (also used for blade characterization).
D0901815-v1: Initial release of HLTS Inside Intermediate Wire Upper Clamp (also used for blade characterization).
D0901813-v1: Initial release of OMC/HSTS Inside Intermediate Wire Upper Clamp (also used for blade characterization).
D0901855-v1: Initial release of OMC/HSTS Outside Intermediate Wire Upper Clamp (also used for blade characterization).


DCC Version 3.4.3, contact Document Database Administrators