DCN - AOSEM Alignment and Mounting Brackets

Document #:

LIGO-E0900243-x0

Document type:

E - Engineering documents

Abstract:

This is a DCN for part and assembly drawings of AOSEM Alignment and Mounting Brackets for the HLTS.

Files in Document:

None

Topics:

• Preliminary Design
• Change Control
• Suspensions

Authors:

• Derek Bridges

Keywords:

HLTS SUS AOSEM bracket alignment mounting

Notes and Changes:

All drawings are initial releases.

Approval Note
1. After discussion with SUS folks I propose the approval of this design for the prototype. Questions on the stiffness and approach will be addressed during the prototype phase and if necessary modified prior to production. Calum Torrie

Related Documents:

• LIGO-D0902024-v1: Upper AOSEM Alignment Assembly, Intermediate Mass, HLTS
• LIGO-D0901492-v1: AOSEM Alignment Bracket, Intermediate Mass, HLTS
• LIGO-D0901548-v1: AOSEM Adjustment Collar
• LIGO-D0902025-v1: Upper AOSEM Mounting Bracket, Intermediate Mass, HLTS
• LIGO-D0901551-v1: Lower AOSEM Alignment Assembly, Intermediate Mass, HLTS
• LIGO-D0901493-v1: Lower AOSEM Mounting Bracket, Intermediate Mass, HLTS
• LIGO-D0901552-v1: Upper AOSEM Alignment Assembly, Test Mass, HLTS
• LIGO-D0901549-v1: AOSEM Alignment Bracket, Test Mass, HLTS
• LIGO-D0901550-v1: Upper AOSEM Mounting Bracket, Test Mass, HLTS
• LIGO-D0901553-v1: Lower AOSEM Alignment Assembly, Test Mass, HLTS
• LIGO-D0900340-v1: Lower AOSEM Mounting Bracket, Test Mass, HLTS