aLIGO Pcal Periscope Mirror Alignment Pin
- Document #:
- LIGO-D1300022-v2
- Document type:
- D - Drawings
Other Versions:
- Abstract:
- Aligns Pcal Periscope mirror mounts to bases for repeatable positioning.
- Files in Document:
-
- D1300022-v2 aLIGO Pcal Periscope Mirror Alignment Pin.PDF (file is not accessible)
- Other Files:
- DXF (D1300022-v2 aLIGO Pcal Periscope Mirror Alignment Pin.DXF, file is not accessible)
- STEP (D1300022-v2 aLIGO Pcal Periscope Mirror Alignment Pin.STEP, file is not accessible)
- Solidworks Part (D1300022 aLIGO Pcal Periscope Mirror Alignment Pin.SLDPRT, file is not accessible)
- ICS/JIRA Record:
-
- ICS_LINK
- Topics:
- Authors:
- Notes and Changes:
- FLAG NOTE 5: REMOVED "INDIVIDUALLY"
ADDED DRAWING NOTE 10:
"CENTER DRILLING IS PERMISSIBLE AT BOTH ENDS OF PART. MAX DIAMETER OF DRILL HOLE AT SMALL END OF PART SHALL NOT EXCEED 0.110"." ZONE B4: TOLERANCE CHANGED
-IS- .1877 +.0000/-.0004
-WAS- .1877 +/-.0001
- Referenced by:
- LIGO-E1300028: DCN- Release of Pcal Periscope Mirror Alignment Pin
- LIGO-E1300038-v1: ECR - Pcal Periscope Mirror Alignment Pin
- LIGO-D1200173-v3: aLIGO, PCAL, MIRROR MOUNT BASE, ETM CAMERA
- LIGO-D1200172-v3: aLIGO, PCAL, MIRROR MOUNT BASE, ETM BEAM