EOM Driver Circuit
- Document #:
- LIGO-D1200794-v3
- Document type:
- D - Drawings
Other Versions:
| LIGO-D1200794-v1
31 May 2012, 11:15 |
- Abstract:
- A small (1.2" X 1.75") high gain resonant EOM driver circuit useful for applying up to 30 volts peak to peak across a low capacitance (tens of pf) EOM. Features a 50 ohm source impedance and has been measured to provide 29.8Vp-p output for a 0.19Vp-p input at an RF frequency of 20.9MHz. Circuit should work into the tens of MHz. A monitor of the RF drive is buffered and available on a dedicated connector.
- Files in Document:
-
- PDF of Schematic and Layout (EOM_v3.pdf, file is not accessible)
- Other Files:
- Altium Project Files (zipped) (EOM_v3 (8-22-2013 2-31-45 PM).zip, file is not accessible)
- Bill of materials in Excel Format (EOM_BOM_v3.xlsx, file is not accessible)
- Gerber data for PCB Manufacture (EOM_v3_gbr.zip, file is not accessible)
- ODB++ File (EOM_odb.zip, file is not accessible)
- ICS/JIRA Record:
-
- ICS_LINK
- Topics:
- Authors:
- Keywords:
- EOM
- Notes and Changes:
- Present version of board and schematic is revision 3. This revision incorporates some minor changes to the monitoring circuit and the power connector.
- Referenced by: