GS-13, Flexure, Bottom

Document #:

LIGO-D0901318-v3

Document type:

D - Drawings

Abstract:

LIGO modified bottom flexure for GS-13

Files in Document:

• D0901318_GS-13_Flexure_Bottom.PDF (file is not accessible)

ICS/JIRA Record:

• ICS_LINK

Topics:

• Final Design

Authors:

• Sam Barnum
• Daniel Clark

Notes and Changes:

Changed .1" radius to .09" per HPD request

Subject:
radius for the GS-13 flexure
From:
Brian Lantz
Date:
Tue, 22 Sep 2009 16:22:54 -0700
To:
Bill Hollander
CC:
Ken Mason , Alan Wilkins , Rudy Arvizu , Jacqueline Champagnie , Dan Clark , Sam Barnum

Bill,
As we discussed this morning, changing that 0.100" radius on the moving mass end of the GS-13 flexure to a smaller radius is fine. The tangents for the 1/4 circle should stay in the same place. I think that you suggested a 1/16" radius cutter (0.0625") - which seems like a good choice.

When you pick a cutter, let us know so that we (Sam?) can update our drawings.

Notes for my recollection:
1) I would like to leave some radius there, to make the two ends more obviously different.
2) Making the radius smaller, while leaving the tangents in the same place, removes more metal. This is good because the attach point of the top flexure to the GS-13 moving mass has a non-square shape, and we mustn't have an interference.
3) The 0.100" radius is not a standard cutter, and it seems wasteful to grind custom cutting tools to match a non-critical dimension.

-Brian

----------
Brian Lantz